- Single–stage cooling capacity control on 04 to 07 models, 2–stage cooling capacity control on 08 to 14 models
- SEER up to 15.6, EER up to 13.0
- IEERs up to 13.0 with single speed indoor fan motor, and up to 14.3 with SAVt (Staged Air Volume) 2–speed/VFD indoor fan motor system
- Exclusive non–corrosive composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; side or center drain
- Gas efficiencies up to 82%
- Induced draft combustion design
- Redundant gas valve, with up to 2 stages of heating
- Pre–painted exterior panels and primer–coated interior panels tested to 500 hours salt spray protection
- TXV refrigerant metering system on each circuit
- Fully insulated cabinet
- Exclusive IGC solid–state control for on–board diagnostics with LED error code designation, burner control logic and energy saving indoor fan motor delay
- Dedicated 3–5 ton Low NOx models available that meet California Air Quality Management NOx requirement of 40 nangram/joule or less. Low NOx models include stainless steel heat exchangers
- Cooling operating range up to 125_F (52_C), and down to 35_F (2_C), 0_F (–18_C) on 11 size standard
- Access panels with easy grip handles
- Innovative , easy starting, no–strip screw feature on unit access panels
- Two–inch disposable return air filters
- Tool–less filter access door
- Belt drive evaporator–fan motor and pulley combinations available on all three phase models
- Electric Drive X13 (5 speed/torque) motor on 04 to 06 models
- New terminal board facilitating simple safety circuit troubleshooting and simplified control box arrangement
- Field Convertible airflow (3–12.5 ton). Being able to convert a unit from vertical airflow to horizontal makes it easy to overcome job site complications. 12.5 ton models require a simple supply air duct cover to field convert from factory vertical to horizontal.
- Provisions for thru–the–bottom power entry capability as standard
- Single point gas and electric connections
- Full perimeter base rail with built–in rigging adapters and fork truck slots
- Scroll compressors with internal line–break overload protection
- 24–volt control circuit protected with resettable circuit breaker
- Permanently lubricated evaporator–fan motor
- Totally enclosed condenser motors with permanently lubricated bearings
- Low Pressure switch and high–pressure switch protection
- Exclusive IGC anti–cycle protection for gas heat operation
- Solid–state electronic direct spark ignition system
- Flame roll–out safety protector
- Liquid line filter drier on each circuit
- Factory–installed Humidi–MiZerr Adaptive Dehumidification System on all sizes, includes MotorMaster I controller.
- Standard Warranty: 10 yr. aluminized heat exchanger, 15 yr. stainless steel heat exchanger, 5 yr. compressor, 1 yr. parts.
- Optional SAV system utilizes a Variable Frequency Drive (VFD) to automatically adjust the indoor fan motor speed between cooling stages. Available on 2–stage cooling models 08–14 with electromechanical, ComfortLink or RTU Open controls.
Item: 48HCDA04A0A3-0A1C0 MFR: 48HCDA04A0A3-0A1C0
Carrier 3 Ton High Efficiency Gas Heat/Electric Cooling Packaged Rooftop Unit
Request a quote
Specifications
Weight | 505.0000 Pound (lb.) |
---|---|
Length | 46.7500 Inches (in) |
Width | 74.3750 Inches (in) |
Height | 33.3750 Inches (in) |
Country of Origin | MEX |
UPC or Barcode | 1P48HCDA04A0A3-0A1C0 |
Hazardous Material | No |
EPA Cert Required | No |
Air Flow | Convertible |
Brand | Carrier |
Coil Type | RTPF |
Color | Gray |
Condenser Motor HP | 1/8 HP |
Cooling Capacity | 36000 |
Cycle/Hertz | 60 |
Drain Connection Size | 0.75 |
EER | 12 |
Energy Star Rated | Yes |
Equipment Type | Gas Electric |
Filter Size | 16 x 25 x 2 (Qty=2) |
Heat Exchanger Type | Aluminized |
Ignition Type | Direct Spark |
ISO Code | MX |
Phase | Single |
Refrigerant | R-410a |
SEER | 15 |
Sound Level (dBA) | 76 |
Stage | Single |
Tonnage | 3 |
UL Listed | Yes |
UL Recognized | Yes |
Voltage | 208-230 VAC |
Watts | 190 |